OBD Dashboard
Coolant
-- °C
Engine load
-- %
Throttle
-- %
Intake air
-- °C
MAF
-- g/s
Timing
-- °
Fuel
-- %
Battery
-- V
Phone OBD apps (ELM327)
Bluetooth starting…Hotspot on this phone → WiFi adapter at the IP, port 35000. No hotspot at boot → Bluetooth OBDII PIN 1234 (Android). Never both (one radio).
Bluetooth name
OBDII
PIN
1234
WiFi adapter
--
App linked
No
Admin · radio transport
—Force WiFi or Bluetooth at next boot. The ESP32 has one 2.4 GHz radio — switching mode saves the setting and reboots.
Charts (last 60s)
RPM
Speed (km/h)
Session peaks
Max RPM
--
Max speed
-- km/h
Max coolant
-- °C
Max boost
-- kPa
Trouble codes
Press "Read codes" to scan.
ABS / ESP (traction control)
Chassis "C" codes from the ABS/ESP module (VW-specific, UDS). Won't clear if the fault is currently active.
Press "Read codes" to scan the ABS module.
Airbag / SRS
⚠ Safety-critical. Reading is safe. Clearing only helps for soft/stored codes and will NOT clear an active fault or locked crash data — never rely on a cleared code to mean the airbag is functional. Disconnect the battery before working on SRS wiring.
Press "Read codes" to scan the airbag module.
UDS ECU scan
Read-only. Probes each VAG module through the gateway, then dumps engine identification DIDs (0xF180–0xF1FF). No coding, no security access, no writes.
VIN
--
Press "Scan ECUs" with ignition ON.
Supported PIDs
Press "Scan vehicle" to list every PID the car supports.
CAN recorder
Remote stream…
Raw CAN frames
Not recording. Press "Start recording" to capture all CAN bus traffic (not just OBD).
Connecting...